Support
Trimble Home  >  Support  >  SPS551H Modular Add-on GPS Receiver

Support Notes

Support Notes detailing latest support issues.

High Data Rate Ethernet Streams with Trimble SPSx50(High Data Rate Ethernet Streams with Trimble SPSx50 or NetR5 Receivers.pdf - 138 KB)The Trimble SPSx50 and NetR5 GPS Receivers support generation of data streams at rates up to 20Hz, the maximum output rate is dependent on the exact model of receiver in use. When this data stream is used over a TCP/IP connection the data in the stream the data may arrive at a 5Hz rate depending on the TCP/IP configuration of the receiving system.
SPSx51 OmniSTAR Frequency Change for Europe(Construction_SprtNote_OmniSTARFrequencyChangeEurope.pdf - 72 KB)OmniSTAR are have changed the frequency used to transmit correction in some parts of Europe. If you are currently using OmniSTAR services from the AOREH geostationary satellite you will need to manually reconfigure the frequency.
OmniSTAR Services in North America Require Manual Frequency Change for SPSx51 Modular GPS Receiver(Construction_HH_SprtNote_SPSx51_OmniSTARFrequencyChangesNorthAmerica.pdf - 41 KB)
Bluetooth connection to access the Web UI in SPSx50/x51(Construction_SprtNote_SPSx50SPSx51AccessingWebInterfaceUsingBluetooth.pdf - 966 KB)This document describes how to access the web interface on a SPSx50/x51 Modular GPS receiver that has firmware version 3.32 or later installed, using Bluetooth wireless technology on a PC that has the Microsoft® Windows® XP Professional operating system (Service Pack 2) installed.
Zephyr Rover Antenna Dimensions(Zephyr Rover Antenna Dimensions.pdf - 30 KB)