Trimble Recon GPS XC Edition - Support
Trimble Home  >  MGIS Home  >  Recon GPS XC Edition  >  Support

Downloads

Latest files available for download.

GPS Controller SoftwareThe GPS Controller software is a free program designed to allow you to configure a range of GPS receivers. It runs on Windows 2000/XP desktop computers, devices running Windows CE.NET, Windows Mobile 2003 software for Pocket PCs and Windows Mobile Version 5.0/6.
v6.0.1 - Trimble Recon, Operating System (Windows Mobile 6)(Trimble_Recon_V6_0_1WWE.exe - 33301 KB)v6.0.1 is the Microsoft Windows Mobile version 6 operating system for the Trimble Recon handheld.
  • If you have a Trimble Recon handheld that is running Microsoft Windows Mobile version 5.0 software you can purchase an upgrade to the Windows Mobile 6 operating system.
  • For detailed instructions on how to upgrade to the Windows Mobile 6 operating system, refer to the Support Note.
v6.0.1.2 - Trimble Recon, Operating System Patch (Windows Mobile 6)(Trimble_Recon_UpdateWM6WWE-6.0.1-6.0.1.2.cab.pks - 65 KB)
  • The v6.0.1.2 patch should be installed after the v6.0.1 operating sytem has been installed or after a Trimble Recon handheld running Windows Mobile 6 has been reset to factory settings.
  • The v6.0.1.2 patch resolves an issue where the handheld may not be able to connect to wireless access points using wireless LAN.
  • For instructions on how to install the patch, refer to the Support Note.
v5.0.2 - Trimble Recon, Operating System (Windows Mobile 5.0)(ReconUpdateV5_0_2WWE.exe - 23446 KB)Version 5.0.2 operating system can only be installed on a unit running Windows Mobile 5.0.
  • New Features
    • For Recon units with the integrated 802.11 radio (Wireless LAN) capability; improvements were made to the radio's power management algorithm. Users should experience increased battery life when using the 802.11 radio as compared to firmware v5.0.1.
  • Entitlement
    • If you are running the Microsoft Windows Mobile 5.0 software, you are entitled to this upgrade.
  • Installation Instructions
    • Before beginning ensure you have downloaded all data from your device as all data and programs will be lost on installing the new version of the operating system.
    • Ensure you have ActiveSync v4.2 installed on your desktop computer.
    • Download the file to your desktop computer.
    • Before running the downloaded program disconnect the Recon from your desktop computer
    • Run the program and follow the on-screen instructions to perform the upgrade.
Ricoh Caplio Camera Software Application(Caplio Software.zip - 8851 KB)Ricoh Caplio Software Settings application that will enable configuration of the camera wireless LAN for connection to a Trimble handheld. For details on installing and using the application refer to the Trimble Handhelds Running Windows Mobile Version 5.0 Software: Connecting a Ricoh Caplio 500SE-W Camera Support Note.
Ricoh Caplio Camera Driver(WinXP_WIA_Driver.zip - 225 KB)Ricoh Caplio 500 SE-W camera driver that enables USB connection between camera and PC. For details on installing the driver refer to the Trimble Handhelds Running Windows Mobile Version 5.0 Software: Connecting a Ricoh Caplio 500SE-W Camera Support Note.
GPS Pathfinder XC Windows Drivers(XC_Drivers_for_PC.zip - 1751 KB)To use the GPS Pathfinder XC receiver on a computer that is running the Microsoft Windows Vista, XP, or 2000 operating system, you must first install the GPS Pathfinder XC drivers for Windows. Read the Support Note for instructions on how to do this.
Recon Socket Bluetooth Driver (Windows Mobile 5.0)(BTCEeng120K.exe - 3515 KB)
  • The Socket Bluetooth CompactFlash card drivers to be used with the Trimble Recon running the Microsoft Windows Mobile 5.0 software can be downloaded here.
  • For details on installing the driver and using the Socket Bluetooth card refer to the Using the Socket Bluetooth CompactFlash Card Support Note.
Dial String Editor (Windows Mobile 6)(DialStringEditor.CAB - 231 KB)If your mobile carrier requires you to enter a custom dial string to connect to the internet and you have a GeoExplorer 2008 series, Trimble Nomad, or Trimble Recon handheld running Windows Mobile 6, you will need to use the Dial String Editor to enter the the custom dial string. For instruction on how to use the application see the Support Note Trimble Handheld Computers: Connecting to the Internet Through a Bluetooth-enabled Mobile Phone.