Positioning Services

Trimble Home > Positioning Services > Trimble CenterPoint RTX > Trimble CenterPoint RTX - 1 Minute Initialization

Trimble CenterPoint RTX - 1 Minute Initialization

Trimble CenterPoint RTX - 1 Minute Initialization


  • Via Satellite


  • Nearly instantaneous initialization - Corrections in as quick as 1 minute*
  • High-accuracy - Provides 1.5-inch (3.8 cm)** horizontal accuracy.
  • GNSS Compatibility (GPS, GLONASS, QZSS)
  • More uptime - Continue working during times of correction signal loss for up to two minutes.
  • No base station required
  • Cost effective – No additional data or cellular plans required
Product Information

* Receiver convergence time varies based on type of receiver, GNSS constellation health, level of multipath, and proximity to obstructions such as large trees and buildings

** All horizontal accuracy specifications are based on repeatable in-field performance 95% of the time.

Trimble CenterPoint RTX - 1 Minute Initialization

  • Overview
  • Coverage
  • How it Works
  • Resources

Sub 4 centimeter accuracy in less than one minute

Trimble® CenterPoint™ RTX™ Fast delivers GNSS enabled, repeatable 1.5-inch (3.8 cm) corrections to your receiver in as quick as one minute. Available via satellite, CenterPoint RTX Fast corrections can be delivered directly to the built-in receiver of your Trimble TMX-2050™ display, FmX® integrated display, CFX-750™ display, or AG-372 GNSS receiver, eliminating the need to purchase additional radio hardware or cellular data plans.

As the most accurate satellite-delivered correction service available, CenterPoint RTX Fast doesn't require an RTK base station or cellular service. It is now available throughout a central swath of North America.

CenterPoint RTX Fast is currently available in a central swath of North America. Refer to the map below to see if it is available in your area.

CenterPoint RTX Coverage Map

Trimble CenterPoint RTX correction service is powered by Trimble RTX technology. CenterPoint RTX leveragesreal-time data from a global tracking station network along with innovativepositioning and compression algorithms to compute and relay satellite orbit,satellite clock, and other system adjustments to the receiver, resulting in thereal time high accuracies nearly instantaneously. These adjustments aretransmitted to the receiver via satellite (where coverage is available) or via IP (Internet Protocol) worldwide.

When turned on, your receiver tracks the RTX (L-band) satellite as well as every other satellite in its field of view (including GPS, GLONASS, and QZSS). From the L-band satellite, you will receive the RTX realtimecorrection stream that allows you to calculate your position to high accuracies, without the need of a base station.