Trimble Navigation Limited
935 Stewart Drive
Post Office Box 3642
Sunnyvale, CA 94085
Trimble Introduces the AP10 Receiver for Low-Cost GNSS-Aided Inertial Navigation
The announcement was made today at AUVSI's Unmanned Systems North America 2010, the world's premier forum for unmanned systems.
The AP10 incorporates a Micro-Electro-Mechanical System (MEMS) based Inertial Measurement Unit (IMU) directly on the board set, resulting in the smallest GNSS-Aided Inertial Navigation System available from Trimble to date. The lightweight, compact technology enables high-accuracy mobile mapping and positioning in almost any environment, including dense urban areas, under bridges, through tunnels, and during high banked turns of a survey aircraft—all at a lower cost than previous AP receivers.
Combined with a wheel-mounted Distance Measurement Instrument (DMI), the AP10 provides a full 6-degrees-of-freedom navigation solution that continues through obstacles to GNSS-only positioning such as multipath or complete signal loss. Applanix IN-Fusion technology produces uninterrupted position, roll, pitch, and true heading measurements of moving platforms by combining IMU data with raw GNSS observables and DMI velocity.
GNSS functionality is provided by the Trimble BD960 GNSS receiver module, a multi-channel, multi-frequency OEM GNSS receiver that supports a wide range of satellite signals, including GPS L1/L2/L2C/L5 and GLONASS L1/L2 signals. With four additional channels, the modules also support Satellite-Based Augmentation Service (SBAS) corrections, including the U.S. Wide Area Augmentation System (WAAS), European Geostationary Overlay Service (EGNOS) and Japan's Multi-functional Satellite Augmentation System (MSAS). The AP Series can also access OmniStar VBS, HP and XP corrections.
"Trimble continues to be a leading provider of technology for positioning and orientation solutions with the addition of the AP10 receiver," said Kevin Andrews, product manager. "The AP10 has been designed as a more compact, lighter unit which can deliver excellent performance at lower cost."
The Trimble AP10 was designed for system integrators with needs for robust positioning and orientation for mapping, navigation, or machine control solutions and is available now through the Trimble Precision GNSS-Inertial sales channel. For more information on the Trimble AP10 and the AP Series, visit: www.trimble.com/GNSS-Inertial.
Trimble applies technology to make field and mobile workers in businesses and government significantly more productive. Solutions are focused on applications requiring position or location—including surveying, construction, agriculture, fleet and asset management, public safety and mapping. In addition to utilizing positioning technologies, such as GPS, lasers and optics, Trimble solutions may include software content specific to the needs of the user. Wireless technologies are utilized to deliver the solution to the user and to ensure a tight coupling of the field and the back office. Founded in 1978, Trimble is headquartered in Sunnyvale, Calif.