Print News   |   Send Link
Trimble Navigation Limited
935 Stewart Drive
Post Office Box 3642
Sunnyvale, CA 94085
1.408.481.8000 phone
1.408.481.7781 fax

  NEWS RELEASE

 

Trimbles Tiny Surface Mount GPS Receiver Adds WAAS and EGNOS Capability

Ultra-Thin Copernicus GPS Module with Low Power Ideal for Drop-In, Ready to Go Positioning


HANNOVER, Germany, March 15, 2007 Trimble (NASDAQ: TRMB) introduced today a new firmware for its Copernicus™ GPS receiver—Wide Area Augmentation System (WAAS) and European Geostationary Navigation Overlay Service (EGNOS) capability. The new firmware allows users to take advantage of satellite-based augmentation systems for improved positioning accuracy.

The announcement was made today at CeBIT, the world's largest trade fair showcasing digital IT and telecommunications solutions for home and work environments.

The Copernicus GPS receiver is a thumbnail-sized, surface-mount, low power Global Positioning System (GPS) module for mobile devices. With major advancements in performance, sensitivity and startup times, the Copernicus GPS module enables system integrators to easily add GPS capability to a mobile device with minimal impact on its size or battery life at a very economical price. It is ideal for adding GPS to Bluetooth appliances, sport accessories, personal navigators or cameras, computer and communication peripherals as well as vehicle tracking, navigation, and security products.

The Copernicus GPS module is a complete drop-in, ready-to-go receiver that provides position, velocity and time data. The receiver features the new Trimble TrimCore™ patented software technology that provides extremely fast startup times and high performance in foliage and urban canyon environments. Compatible with active or passive antennas, the Copernicus GPS receiver can be used in next- generation portable handheld, battery-powered applications.

Designed for the demands of automated high-volume production processes, Copernicus is a complete 12-channel GPS receiver in a 19mm x 19mm x 2.5mm shielded module. The small, thin, single-sided receiver is packaged in tape and reel for pick and place manufacturing processes. It features a 28 reflow-solderable edge castellation interface so the module can be incorporated in a product design without costly I/O and RF connectors. Each module is manufactured and factory tested to Trimbles highest quality standards. In addition, the Copernicus GPS receiver has been designed to meet restrictions on the use of hazardous substances under the RoHS European Directive.

The ultra-sensitive Copernicus GPS receiver can acquire satellite signals and generate position fixes with high accuracy in extremely challenging environments and under poor signal conditions. The receiver consumes typically 93.9 milliwatts (31.3 milliamps) at full power with continuous tracking.

The Copernicus GPS module is available in three protocols. Trimbles powerful TSIP protocol offers complete control over receiver operation and provides detailed satellite information. The TAIP protocol is an easy-to-use ASCII protocol designed specifically for track and trace applications. The bi-directional NMEA 0183 v3.0 protocol offers industry standard data messages and a command set for easy interface to mapping software.

The Copernicus Starter Kit provides everything a designer needs to begin adding state-of-the-art GPS capability into their application. The kit includes the reference interface board, which provides a visual layout of the Copernicus module on a PCB including the RF signal trace and RF connector, as well as the I/O and power connections of the 28 signal pins. Also included are a power converter, power adapter, GPS antennas, and the software to readily check out how easy it is to add Copernicus GPS to the application.

The new Copernicus GPS receiver with WAAS/EGNOS firmware is expected to be available in the third quarter of 2007 through Trimble's distribution network.

About WAAS and EGNOS

Both WAAS and EGNOS are Satellite-Based Augmentation Systems (SBAS) used to improve both the accuracy and integrity monitoring of GPS. WAAS was developed by The Federal Aviation Administration (FAA) and the Department of Transportation (DOT) for use in North America. EGNOS is a joint project of the European Space Agency, the European Commission and Eurocontrol. The regional augmentation systems consist of geostationary satellites and ground stations that provide GPS signal corrections, giving users with WAAS and EGNOS capable GPS receivers even better position accuracy—typically better than 3 meters. The systems correct for GPS signal errors caused by ionospheric disturbances, timing and satellite orbit errors.

About Trimble

Trimble applies technology to make field and mobile workers in businesses and government significantly more productive. Solutions are focused on applications requiring position or location—including surveying, construction, agriculture, fleet and asset management, public safety and mapping. In addition to utilizing positioning technologies, such as GPS, lasers and optics, Trimble solutions may include software content specific to the needs of the user. Wireless technologies are utilized to deliver the solution to the user and to ensure a tight coupling of the field and the back office. Founded in 1978 and headquartered in Sunnyvale, Calif., Trimble has a worldwide presence with more than 3,400 employees in over 18 countries.

Certain statements made in this press release are forward looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, and are made pursuant to the safe harbor provisions of the Securities Litigation Reform Act of 1995. These statements involve risks and uncertainties, and actual events and results may differ materially from those described in this press release.  Factors that could cause or contribute to such differences include, but are not limited to, unforeseen technical difficulties in implementing the new firmware; the operation of the firmware and the performance and market acceptance of the Copernicus GPS module; and claims of intellectual property infringement. More information about potential factors which could affect Trimbles business and financial results is set forth in reports filed with the SEC, including Trimble's quarterly reports on Form 10-Q and its annual report on Form 10-K. All forward looking statements are based on information available to Trimble as of the date hereof, and Trimble assumes no obligation to update such statements.



Investor Relations Contact:   Willa McManmon of Trimble: 408-481-7838

Media Contact:   
LeaAnn McNabb of Trimble: 408-481-7808



Print News   |   Send Link