|
|
Downloads
Latest files available for download.
v3.40 SoftwareFrom here you can download version 3.40 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.40 requires ArcPad version 10. GPScorrect version 3.40 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v3.40 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one device at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
New Features
-
Read the version 3.40 Release Notes for details on the new features and how to perform the installation.
Entitlement
- If you have a Software Maintenance Extension valid on or after 28 February 2012, you are entitled to v3.40. Use your existing installation code to install v3.40.
- If you do not have a Software Maintenance Extension valid on 28 February 2012, contact your local Trimble representative for details on upgrading to v3.40.
To post process data collected with the GPScorrect v3.40 extension, one of the following is required:
- Version 5.30 or later of the GPS Pathfinder Office software with the latest software updates.
- Version 2.40 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v3.31 SoftwareFrom here you can download version 3.31 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.31 requires ArcPad version 10. GPScorrect version 3.31 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v3.31 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one device at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
New Features
-
Read the version 3.31 Release Notes for details on the new features and how to perform the installation.
Entitlement
- If you have a Software Maintenance Extension valid on or after 22 August 2011, you are entitled to v3.31. Use your existing installation code to install v3.31.
- If you do not have a Software Maintenance Extension valid on 22 August 2011, contact your local Trimble representative for details on upgrading to v3.30.
To post process data collected with the GPScorrect v3.31 extension, one of the following is required:
- Version 5.20 or later of the GPS Pathfinder Office software with the latest software updates.
- Version 2.40 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v3.20 SoftwareFrom here you can download version 3.20 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.20 only supports the GeoExplorer 6000 series. GPScorrect version 3.20 requires ArcPad version 10. GPScorrect version 3.20 does not support earlier versions of ArcPad. ArcPad must be installed onto your GeoExplorer 6000 series handheld before you install the v3.20 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one GeoExplorer 6000 series handheld at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
New Features
-
Read the version 3.20 Release Notes for details on the new features and how to perform the installation.
Entitlement
- If you have a Software Maintenance Extension valid on or after 17 February 2011, you are entitled to v3.20. Use your existing installation code to install v3.20.
- If you do not have a Software Maintenance Extension valid on 17 February 2011, contact your local Trimble representative for details on upgrading to v3.20.
To post process data collected with the GPScorrect v3.20 extension, one of the following is required:
- Version 5.10 or later of the GPS Pathfinder Office software with the latest software updates.
- Version 2.40 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v3.16 SoftwareFrom here you can download version 3.16 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.16 requires ArcPad version 8.0 or 10. GPScorrect version 3.16 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v3.16 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one Windows Mobile (version 5.0 or 6) powered device at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
New Features
-
Read the version 3.16 Release Notes for details on the new features and how to perform the installation.
Entitlement
- If you have a Software Maintenance Extension valid on or after 4 October 2010, you are entitled to v3.16. Use your existing installation code to install v3.16.
- If you do not have a Software Maintenance Extension valid on 4 October 2010, contact your local Trimble representative for details on upgrading to v3.16.
To post process data collected with the GPScorrect v3.16 extension, one of the following is required:
- Version 4.20 or later of the GPS Pathfinder Office software with the latest software updates.
- Version 2.20 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v3.15 SoftwareFrom here you can download version 3.15 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.15 requires ArcPad version 8.0 or 10. GPScorrect version 3.15 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v3.15 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one Windows Mobile (version 5.0 or 6) powered device at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
New Features
-
Read the version 3.15 Release Notes for details on the new features and how to perform the installation.
Entitlement
- If you have a Software Maintenance Extension valid on or after 4 October 2010, you are entitled to v3.15. Use your existing installation code to install v3.15.
- If you do not have a Software Maintenance Extension valid on 4 October 2010, contact your local Trimble representative for details on upgrading to v3.15.
To post process data collected with the GPScorrect v3.15 extension, one of the following is required:
- Version 4.20 or later of the GPS Pathfinder Office software with the latest software updates.
- Version 2.20 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v3.14 SoftwareFrom here you can download version 3.14 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.14 requires ArcPad version 7.1.1, 8.0 or 10. GPScorrect version 3.14 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v3.14 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one Windows Mobile (version 5.0 or 6) powered device at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
New Features
-
Read the version 3.14 Release Notes for details on the new features and how to perform the installation.
Entitlement
- If you have a Software Maintenance Extension valid on or after 4 October 2010, you are entitled to v3.14. Use your existing installation code to install v3.14.
- If you do not have a Software Maintenance Extension valid on 4 October 2010, contact your local Trimble representative for details on upgrading to v3.14.
To post process data collected with the GPScorrect v3.14 extension, one of the following is required:
- Version 4.20 or later of the GPS Pathfinder Office software with the latest software updates.
- Version 2.20 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v3.13 SoftwareFrom here you can download version 3.13 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.13 requires ArcPad version 7.1, 7.1.1, or 8.0. GPScorrect version 3.13 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v3.13 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one Windows Mobile (version 5.0 or 6) powered device at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
New Features
-
Read the version 3.13 Release Notes for details on the new features and how to perform the installation.
Entitlement
- If you have a Software Maintenance Extension valid on or after 1 Dec 2009, you are entitled to v3.13. Use your existing installation code to install v3.13.
- If you do not have a Software Maintenance Extension valid on 1 Dec 2009, contact your local Trimble representative for details on upgrading to v3.13.
To post process data collected with the GPScorrect v3.13 extension, one of the following is required:
- Version 4.20 of the GPS Pathfinder Office software with the latest software updates.
- Version 2.20 of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v3.10 SoftwareFrom here you can download version 3.10 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.10 requires ArcPad version 7.1 or later. GPScorrect version 3.10 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v3.10 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one Windows Mobile (version 5.0 or 6) powered device at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
Support for the Trimble GPS Pathfinder ProXRT receiver running firmware version 3.60 has been discontinued. You will need to update your receiver's firmware to version 3.72. For the firmware version 3.72 and instructions on how to upgrade your existing receiver firmware, go to http://www.trimble.com/pathfinderproxrt_ts.asp
New Features
-
Read the version 3.10 Release Notes for details on the new features and how to perform the installation.
Entitlement
- If you have a Software Maintenance Extension valid on or after 1 Dec 2009, you are entitled to v3.10. Use your existing installation code to install v3.10.
- If you do not have a Software Maintenance Extension valid on 1 Dec 2009, contact your local Trimble representative for details on upgrading to v3.10.
To post process data collected with the GPScorrect v3.10 extension, one of the following is required:
- Version 4.20 of the GPS Pathfinder Office software with the latest software updates.
- Version 2.20 of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v3.02 SoftwareFrom here you can download version 3.02 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTES
GPScorrect version 3.02 requires ArcPad version 7.00 or later. GPScorrect version 3.02 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v3.02 GPScorrect extension.
A GPScorrect extension installation code can only be activated on one Windows Mobile (version 5.0 or 6) powered device at a time. If you activate an installation code on the wrong device or need to change the device the extension is activated on you will need to contact your Trimble Reseller to request it be deactivated.
New Features
-
An issue that did not allow real-time solutions to converge to 10 cm when using a
GeoXH handheld running firmware version 2.11 has been fixed.
-
Version 3.02 of the GPScorrect extension includes the following changes:
- Support for the Trimble Yuma tablet rugged tablet computer.
- Support for the Trimble GPS Pathfinder ProXRT receiver running firmware version 3.72.
- Support for the Indian GAGAN satellites. The frequencies used by the Indian GAGAN SBAS system have been added to the SBAS.ini file; you can now manually select these frequencies for use with receivers that support them.
- Support for OmniSTAR frequencies that have 500 Hz offsets (4th decimal place).
- Support for software activation on field computers powered by the Windows Mobile version 5.0 software or version 6 operating system. For more information, refer to the Trimble GPScorrect Extension Getting Started Guide.
- The heading display for SiRF-based receivers now correctly displays headings between 326 and 359 degrees.
- A bug that allowed the wrong date to be written to the SSF correction file has been corrected.
- A bug that allowed the SSF to become corrupt due to a missing ArcPad vertex has been corrected.
- A bug caused by excessive receiver clock drift that prevented data from being post-processed has been corrected.
- Read the version 3.02 Release Notes for details on how to perform the installation.
- Version 3.00 or later of the GPScorrect extension no longer ships with an Updater Utility.
- Support for the Trimble GPS Pathfinder ProXRT receiver running firmware version 3.60 has been discontinued. You will need to update your receiver's firmware to version 3.72. For the firmware version 3.72 and instructions on how to upgrade your existing receiver firmware, go to http://www.trimble.com/pathfinderproxrt_ts.asp.
Entitlement
- If you have a Software Maintenance Extension valid on or after 2 Dec 2008, you are entitled to v3.02. Use your existing installation code to install v3.02.
- If you do not have a Software Maintenance Extension valid on 2 Dec 2008, contact your local Trimble representative for details on upgrading to v3.02.
To post process data collected with the GPScorrect v3.02 extension, one of the following is required:
- Version 4.10 of the GPS Pathfinder Office software with the latest software updates.
- Version 2.10 of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v2.42 SoftwareFrom here you can download version 2.42 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTE
GPScorrect version 2.42 requires ArcPad version 7.00 or later. GPScorrect version 2.42 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v2.42 GPScorrect extension.
New Features
- Read the version 2.42 Release Notes for details on how to perform the installation, and the new features in version 2.42.
Entitlement
- If you have a Software Maintenance Extension valid on or after 2 Dec 2008, you are entitled to v2.42. Use your existing installation code to install v2.42.
- If you do not have a Software Maintenance Extension valid on 2 Dec 2008, contact your local Trimble representative for details on upgrading to v2.42.
To post process data collected with the GPScorrect v2.42 extension, one of the following is required:
- Version 4.10 of the GPS Pathfinder Office software with the latest software updates.
- Version 2.10 of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v2.41 SoftwareFrom here you can download version 2.41 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTE
GPScorrect version 2.41 requires ArcPad version 7.00 or later. GPScorrect version 2.41 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or Windows Mobile device before you install the v2.41 GPScorrect extension.
New Features
- Support for the GeoExplorer 2008 series handhelds. These handhelds have an integrated GPS receiver.
- Read the version 2.41 Release Notes for details on how to perform the installation, and the new features in version 2.41.
Entitlement
- If you purchased a copy of GPScorrect from 15 February 2008 you are entitled to version 2.41.
- If you have a Software Maintenance Extension valid on or after 15 May 2008, you are entitled to v2.41. Use the installation code to install v2.41.
- If you do not have a Software Maintenance Extension valid on 15 May 2008, contact your local Trimble representative for details on upgrading to v2.41.
To post process data collected with the GPScorrect v2.41 extension, one of the following is required:
- Version 4.10 of the GPS Pathfinder Office software with the latest software updates.
- Version 2.10 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v2.40 SoftwareFrom here you can download version 2.40 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTE
GPScorrect version 2.40 requires ArcPad version 7.00 or later. GPScorrect version 2.40 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or CE device before you install the v2.40 GPScorrect extension.
New Features
- Support for the GPS Pathfinder ProXRT receiver
- Support for GLONASS satellites tracked and used by the GPS Pathfinder ProXRT receiver to compute positions
- Changes to the display of estimated accuracy values on the status bar
- Read the version 2.40 Release Notes for details on how to perform the installation, and the new features in version 2.40.
Entitlement
- If you purchased a copy of GPScorrect from 4 December 2007 you are entitled to version 2.40.
- If you have a Software Maintenance Extension valid on or after 3 March 2008, you are entitled to v2.40. Use the installation code to install v2.40.
- If you do not have a Software Maintenance Extension valid on 3 March 2008, contact your local Trimble representative for details on upgrading to v2.40.
To post process data collected with the GPScorrect v2.40 extension, one of the following is required:
- Version 4.10 of the GPS Pathfinder Office software with the latest software updates.
- Version 2.10 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v2.30 SoftwareFrom here you can download version 2.30 of the Trimble GPScorrect extension for ESRI ArcPad software.
IMPORTANT NOTE
GPScorrect version 2.30 requires ArcPad version 7.00 or later. GPScorrect version 2.30 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or CE device before you install the v2.30 GPScorrect extension.
- New Features
- Provides support for the Trimble Nomad series of handhelds
- Provides support for version 7.1 of the ESRI ArcPad software, including the new AXF format.
- Read the version 2.30 Release Notes for details on how to perform the installation, and the new features in version 2.30.
- Entitlement
- If you purchased a copy of GPScorrect from 8 August 2007 you are entitled to version 2.30.
- If you have a Software Maintenance Extension valid on or after 10 December 2007, you are entitled to v2.30. Use the installation code to install v2.30.
- If you do not have a Software Maintenance Extension valid on 10 December 2007, contact your local Trimble representative for details on upgrading to v2.30.
- To post process data collected with the GPScorrect v2.30 extension, one of the following is required:
- Version 4.00 of the GPS Pathfinder Office software with the latest software updates.
- Version 2.10 or later of the GPS Analyst extension for ESRI ArcGIS software with the latest software updates.
v2.20 SoftwareFrom here you can download version 2.20 of the GPScorrect extension for ArcPad software.
IMPORTANT NOTE
GPScorrect version 2.20 requires ArcPad version 7.00 or later. GPScorrect version 2.20 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or CE device before you install the v2.20 GPScorrect extension.
- New Features
- Provides support for the Juno ST handheld.
- Read the version 2.20 Release Notes for details on how to perform the installation, and the new features in version 2.20.
- Entitlement
- If you registered a copy of GPScorrect from 23 January 2007 you are entitled to version 2.20.
- If you have a Software Maintenance Extension valid on 23 April 2007, you are entitled to v2.20. Use the installation code to install v2.20.
- If you do not have a Software Maintenance Extension valid on 23 April 2007, contact your local Trimble representative for details on upgrading to v2.20.
- To postprocess data collected with the GPScorrect v2.20 extension, one of the following is required:
- Version 4.00 of the GPS Pathfinder Office software.
- Version 2.10 or later of the GPS Analyst extension for ESRI ArcGIS software.
v2.11 SoftwareFrom here you can download version 2.11 of the GPScorrect for ArcPad software.
IMPORTANT NOTE
GPScorrect version 2.11 requires ArcPad version 7.00. GPScorrect version 2.11 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or CE device before you install the v2.11 GPScorrect extension.
- New Features
- Provides support for the GPS Pathfinder XC receiver.
- Addresses a problem with GPS Pathfinder XB receivers outputting invalid time and position information.
- Read the version 2.10 Rev C Release Notes for details on how to perform the installation, and the new features in version 2.11.
- Entitlement
- If you registered a copy of GPScorrect from 9 May 2006 you are entitled to version 2.11.
- If you have a Software Maintenance Extension valid on 7 August 2006, you are entitled to v2.11. Use the
installation serial number to install v2.11.
- If you do not have a Software Maintenance Extension valid on 7 August 2006, contact your local Trimble representative for details on upgrading to v2.11.
- To postprocess data collected with the GPScorrect v2.11 extension, one of the following is required:
- Version 3.10 of the GPS Pathfinder Office software, with the GPScorrect 2.10 support update applied
- Version 1.20 or later of the GPS Analyst extension for ESRI ArcGIS software, with the GPScorrect 2.10 support update applied.
v2.00 Software UpdateThis update should be installed after v2.00 is installed. Details on the issue this update resolves are documented in the Support Note "GPScorrect Extension for the ESRI ArcPad Software: Incorrect Geometry after Postprocessing".
v2.00 SoftwareFrom here you can download version 2.00 of the GPScorrect for ArcPad software.
IMPORTANT NOTE
GPScorrect version 2.00 requires ArcPad version 7.00. GPScorrect version 2.00 does not support earlier versions of ArcPad. ArcPad must be installed onto your PC or CE device before you install the v2.00 GPScorrect extension.
- Entitlement
- If you registered a copy of GPScorrect from 24th October 2005 you are entitled to version 2.00.
- If you have a Field Software Enhancement Extension valid on 20 January 2006, you are entitled to v2.00. Use the
installation serial number to install v2.00.
- If you do not have a Field Software Enhancement Extension valid on 20 January 2006, contact your local Trimble representative for details on upgrading to v2.00.
- To postprocess data collected with the GPScorrect v2.00 extension, one of the following is required:
- Version 3.10 of the GPS Pathfinder Office software, with the GPScorrect 2.00 support update applied
- Version 1.20 of the GPS Analyst extension for ESRI ArcGIS software, with the GPScorrect 2.00 support update applied.
- Read the Release Notes for details on how to perform the installation and the new features in version 2.00.
v1.12 SoftwareFrom here you can download version 1.12 of the GPScorrect for ArcPad software.
IMPORTANT NOTE
ArcPad must be installed onto your PC or CE device before you install the v1.12 GPScorrect extension. GPScorrect
version 1.12 requires ArcPad version 6.03. Earlier versions of GPScorrect must be uninstalled before installing v1.12.
- Entitlement
- If you have version 1.10 or 1.11 installed you are entitled to v1.12. Use the installation serial number to install v1.12.
- If you purchased v1.x after 19 January 2005, you are entitled to v1.12. Register your copy of the software at
www.trimble.com/register to obtain an installation serial number.
- If you have a Field Software Enhancement Extension valid on 19 April 2005, you are entitled to v1.12. Use the
installation serial number to install v1.12.
- If you do not have a Field Software Enhancement Extension valid on 19 April 2005, contact your local Trimble representative for details on upgrading to v1.12.
- Read the Release Notes for details on how to perform the installation and the new features in version 1.12.
(GPScorrect v3.41forProXT_XH.zip - 39738 KB)This GPScorrect version contains a fix for High errors in post-processed ProXT / ProXH SSF files as well as ProXT / ProXH SSF files which fail to post-process.
Occasionally SSF files recorded from ProXT or ProXH receivers fail to post-process, or very high post-processed errors are seen when post-processing ProXT or ProXH SSF files. These problems usually occur when the data collector has just connected to the ProXT / ProXH, or when the user has disconnected from ProXT / ProXH GNSS receiver and reconnected.
Install this GPScorrect version if you are running the ProXH / XT series receivers and GPScorrect.
v1.01 SoftwareFrom here you can download version 1.01 of the GPScorrect for ArcPad software.
IMPORTANT NOTE
ArcPad must be installed onto your PC or CE device before you install the v1.01 GPScorrect extension. GPScorrect version 1.01 requires ArcPad version 6.01 or later. Earlier versions of GPScorrect must be uninstalled before installing v1.01.
- Features
- More accurate and reliable position data using differential postprocessing, SuperCorrect pseudorange logging, and velocity filtering.
- Choice of TRimble GPS Analyst extension for ArcGIS or GPS Pathfinder Office software for differential postprocessing.
- Easy and complete setup of any Trimble GeoExplorer CE series handheld or GPS Pathfinder receiver within ArcPad.
- Real-time differential correction (correction sources depend on GPS receiver used).
- Mission planning in the field to increase productivity.
- Read the Release Notes for details on how to perform the installation and the new features in version 1.01.
SBAS.INI(SBAS.ini - KB)Updated: 25 February 2011.
This SBAS.ini file contains the most up to date list of SBAS satellites.
To install the SBAS.ini file:
- On a Windows Mobile device running Trimble field software, copy the SBAS.ini file to \Program Files\Common Files\Trimble\Config.
- On an office computer running Trimble field software, copy the file to C:\Program Files\Common Files\Trimble\Config.
- On an office computer with GPS Analyst, copy the file to C:\Program Files\Trimble\GPS Analyst\Bin.
ANTENNA.INI File (Translated)(TRANSLATED ANTENNA.zip - 814 KB)Translated Antenna files for Mapping & GIS Software.
This zip file contains translated antenna files for use with the following software:
- Trimble Positions ArcPad extension
- Trimble Positions Desktop add-in
- Trimble GPS Pathfinder Office
- TerraSync
- GPScorrect extension for ArcPad
- GPS Pathfinder Field toolkit
Antenna types, names, and measurement points have been translated in the following languages:
- Chinese (Simplified)
- Chinese (Traditional)
- Croatian
- Czech
- Danish
- Dutch
- English
- Estonian
- Finnish
- French
- German
- Greek
- Hungarian
- Italian
- Japanese
- Korean
- Norwegian
- Polish
- Portuguese
- Russian
- Serbian
- Spanish
- Swedish
- Turkish
To use a translated antenna file see instructions in the readme.txt file.
|
