BX982 GNSS rugged receiver enclosure
The Trimble® BX982 GNSS receiver enclosure is a multi-channel, multi-frequency OEM GNSS receiver which allows OEM's and System Integrators to rapidly integrate centimeter Level positioning and precise heading into their application. The Trimble BX982 supports GPS L1/L2/L5 and GLONASS L1/L2 signals. In addition, Trimble is committed to the next generation of Modernized GNSS configurations by providing GALILEO compatible products available for customers well in advance of GALILEO system availability. In support of this, the Trimble BX982 is capable of tracking Galileo signals for evaluation and test purposes.
Single antenna GNSS systems have difficulty determining where the antenna is positioned relative to the vehicle and object of interest,especially when dynamics are low. External sensors can be used to augment this however, these tend to drift when static. Heading derived from dual-antenna GNSS measurements overcomes these issues and is now economically the right choice. The BX982 harnesses the power of the 220 channel Trimble Maxwell 6 Technology with dual chips supporting two antennas connected to the board. Independent observations from both antennas are passed to the processor where multi-constellation RTK baselines are computed. A single connection to the BX982 via RS232, USB, Ethernet or CAN delivers both centimeter accurate positions and less than a tenth of a degree (2 meter baseline) heading accuracy.
The Trimble BX982 was designed for easy integration and rugged dependability. Customers benefit from the Ethernet connectivity available on the board, allowing high speed data transfer and configuration via standard web browsers. Just like other Easy to use software commands simplify integration and reduce development times. The BX982 is rigorously tested to perform in the harsh environments your products are built for, with the reliability you expect from Trimble.
PHYSICAL AND ELECTRICAL CHARACTERISTICS
|Size||261 mm x 140 mm x 55 mm|
|Power||9 V DC to 28 V DC
Maximum 4.1 W
|Connectors||I/O: D-sub DE9 and DA26
|Antenna LNA Power Output:||Voltage: 5 V DC|