Trimble LV59 GNSS Antenna
The Trimble LV59 Aviation GNSS Antenna has been designed to support centimeter level accuracy on land and marine applications. The rugged 5/8" x 11 female threaded mount and all aluminum base allows the antenna to be used in the most rugged of environments.
Comprehensive GNSS Support
The Trimble LV59 Aviation GNSS antenna offers support for present and future GNSS signals, including GPS L5, GLONASS and Galileo. This ensures that the antenna will operate with your present and most likely future GNSS receivers.
ROBUST, LOW-MULTIPATH GPS ANTENNA
The antenna resists unwanted signal interference or multipath, which can cause inaccurate measurements. Multipath is caused by signals being reflected from surfaces such as the ground, surrounding trees, or buildings.
The antenna is a survey rover type of design. This allows the use of standard survey accessories for either pole or vehicle mounting. Alternatively create your own 5/8" x 11 bolt mounting. This is an ideal design for customers building systems that require easy removal of the antenna. The TNC connector is located on the underside of the unit ensuring the attached cable is also protected from the environment.
|Signal gain||39 dB|
|Voltage||4.2 V DC to 15 V DC|
|Polarization||Right Hand Circular|
|Axial Ratio||3 dB Max @ boresight|
|Amplifier||Noise Figure : 2.6 dBMax
Impedance : 50 Ohms
VSWR : ≤ 2.0:1
|Dimensions||14.62 cm diameter x 6.25 cm height
( 5.75 in diameter x 2.46 in height)
|Weight||0.48 kg (1.06lb)|
|Operating Temperature||–55 °C to +85 °C (–67 °F to +185 °F)|
|Finish||UV resistant white radome with aluminum base|