Transforming the way the world works

Trimble LV59 GNSS Antenna

Trimble Home  >  Precision GNSS + Inertial  >  Antenna Solutions  >  Trimble LV59 GNSS Antenna
Trimble LV59 GNSS Antenna
Trimble LV59 GNSS Antenna

Product Information

The Trimble LV59 Aviation GNSS Antenna has been designed to support centimeter level accuracy on land and marine applications. The rugged 5/8" x 11 female threaded mount and all aluminum base allows the antenna to be used in the most rugged of environments.

Comprehensive GNSS Support
The Trimble LV59 Aviation GNSS antenna offers support for present and future GNSS signals, including GPS L5, GLONASS and Galileo. This ensures that the antenna will operate with your present and most likely future GNSS receivers.

The antenna resists unwanted signal interference or multipath, which can cause inaccurate measurements. Multipath is caused by signals being reflected from surfaces such as the ground, surrounding trees, or buildings.

The antenna is a survey rover type of design. This allows the use of standard survey accessories for either pole or vehicle mounting. Alternatively create your own 5/8" x 11 bolt mounting. This is an ideal design for customers building systems that require easy removal of the antenna. The TNC connector is located on the underside of the unit ensuring the attached cable is also protected from the environment.

Technical Specifications


  • Broad GNSS Frequency Tracking Band Including:
    • GPS: L1, L2, L5
    • GLONASS: L1, L2, L3
    • Galileo: E1, E2, E5,
    • SBAS: WAAS, EGNOS, QZSS, Gagan, MSAS, and OmniStar
  • Quality signal tracking
  • TNC female signal connector
  • Small cross-sectional area to reduce wind loading
  • Low voltage, low power consumption
  • Integral low noise amplifier
  • 5/8" x 11UNC female threaded aluminum mounting point
  • Powered by GNSS receiver via coaxial cable
  • Rugged UV resistant radome and aluminum base designed for machine environments
  • High gain for reliable tracking in difficult environments


Signal gain 39 dB
Voltage 4.2 V DC to 15 V DC
Polarization Right Hand Circular
Axial Ratio 3 dB Max @ boresight
Amplifier Noise Figure : 2.6 dBMax
Impedance : 50 Ohms
VSWR : ≤ 2.0:1


Dimensions 14.62 cm diameter x 6.25 cm height
( 5.75 in diameter x 2.46 in height)
Weight 0.48 kg (1.06lb)
Operating Temperature –55 °C to +85 °C (–67 °F to +185 °F)
Finish UV resistant white radome with aluminum base
Compliance ROHS

Key Features:

  • Comprehensive GNSS support, including GPS Modernization signals, GLONASS, and Galileo
  • Rugged Package ideal for vehicle applications
  • 5/8" x 11 Mounting
  • Sub-centimeter phase center repeatability