Trimble AV59 GNSS Antenna

Trimble Home  >  Precision GNSS + Inertial  >  Antenna Solutions  >  Trimble AV59 GNSS Antenna
Trimble AV59 GNSS Antenna
Trimble AV59 GNSS Antenna

Product Information

The Trimble AV59 Aviation GNSS Antenna has been designed to support centimeter level accuracy on aerial, land and marine applications. The rugged 8 hole bulkhead mounting allows the antenna to be used in the most rugged of environments.

The Trimble AV59 GNSS antenna offers support for present and future GNSS signals, including GPS L5, GLONASS and Galileo. This ensures that the antenna will operate with your present and most likely future GNSS receivers.

Comprehensive GNSS Support
The Trimble AV59 Aviation GNSS antenna offers support for present and future GNSS signals, including GPS L5, GLONASS and Galileo. This ensures that the antenna will operate with your present and most likely future GNSS receivers.

ROBUST, LOW-MULTIPATH GPS ANTENNA
The antenna resists unwanted signal interference or multipath, which can cause inaccurate measurements. Multipath is caused by signals being reflected from surfaces such as the ground, surrounding trees, or buildings.

Flexibility
The antenna is an aviation type of design. The bulkhead mounting ensures only the rugged radome is exposed to the elements. This is an ideal design for customers building machine control systems. The antenna can be mounted flush with the vehicle surface or on the top of a pole mount. The TNC connector is located on the underside of the unit ensuring the attached cable is also protected from the environment.

Technical Specifications

Performance

  • Broad GNSS Frequency Tracking Band Including:
    • GPS: L1, L2, L5
    • GLONASS: L1, L2, L3
    • Galileo: E1, E2, E5,
    • SBAS: WAAS, EGNOS, QZSS, Gagan, MSAS, and OmniStar
  • Quality signal tracking
  • TNC female signal connector
  • Small cross-sectional area to reduce wind loading
  • Low voltage, low power consumption
  • Integral low noise amplifier
  • 8 recessed bulkhead mounting holes
  • Powered by GNSS receiver via coaxial cable
  • Rugged radome designed for machine environments
  • High gain for reliable tracking in difficult environments

Electrical

Signal gain 39 dB
Voltage 4.2 V DC to 15 V DC
Polarization Right Hand Circular
Axial Ratio 3 dB Max @ boresight
Amplifier Noise Figure : 2.6 dBMax
Impedance : 50 Ohms
VSWR : ≤ 2.0:1

Hardware

Dimensions 14.62 cm diameter x 3.89 cm height
( 5.575 in diameter x 1.53 in height)
Weight 0.30 kg (0.67lb)
Operating Temperature –40 °C to +75 °C (–40 °F to +167 °F)
Finish UV resistant white radome with aluminum base
Compliance ROHS

Key Features:

  • Comprehensive GNSS support, including GPS Modernization signals, GLONASS, and Galileo
  • Rugged Package ideal for vehicle applications
  • Bulkhead Mounting
  • Sub-centimeter phase center repeatability

Americas

Trimble Navigation Limited
Integrated Technologies
510 DeGuigne Drive
Sunnyvale, CA 94085
USA
+1-408-481-8000 Phone
+1-408-481-8984 Fax
Email: americasales-intech@trimble.com

Europe & Middle East

Trimble Navigation Limited
Integrated Technologies
Am Prime Parc
65479 Raunheim, Germany
Phone +49 (6142) 177-2135
Fax +49 (6142) 177-2136
Email: emeasales-intech@trimble.com

China

Trimble Navigation Limited
Integrated Technologies
311 Fute (M) Road, 3/F
Wai Gaoqiao Free Trade Zone
Pudong, Shanghai 200131
China
Email: chinasales-intech@trimble.com

Asia-Pacific

Trimble Navigation Limited
Integrated Technologies
Email: asiasales-intech@trimble.com

Russia

Trimble Navigation Limited
Integrated Technologies
Tel: +49 (6142) 177-2135
Email: rusales-intech@trimble.com

For Technical Support please contact:

GNSSOEMSupport@trimble.com