AP60

Trimble Home  >  Precision GNSS + Inertial  >  GNSS-Inertial Positioning and Orientation Systems  >  AP60
AP60
AP60
Overview
Specification
Key Features
Where To Buy

The Trimble AP60 GNSS-Inertial OEM System is an embedded GNSS-Inertial OEM board set plus Inertial Measurement Unit (IMU) in a compact form factor. It is designed to give system integrators the ability to harness the best in GNSS multi-frequency positioning technology, with the superior capabilities of inertial data for continuous mobile positioning in poor signal environments, and for the orientation of imaging sensors.

The Trimble AP60 features a high performance precision GNSS receiver and the industry leading Applanix IN-Fusion™ GNSS-Inertial integration technology running on a powerful, dedicated Inertial Engine (IE) board. This flexible, modular design ensures the ability to perform full high-powered GNSS-inertial processing without sacrificing performance, and an upgrade path to next generation.

TECHNICAL SPECIFICATIONS

  • Advanced Applanix IN-FusionTM GNSS-Inertial integration technology
  • Advanced Trimble Maxwell® 6 Custom GNSS survey technology (two chipsets)
  • 220 Channels:(per chipset)
    • GPS: L1 C/A, L2C, L2E (Trimble method for tracking unencrypted) L5
    • GLONASS: L1 C/A and unencrypted P code, L2 C/A and unencrypted P code, L3 CDMA
    • GALILEO: L1 CBOC, E5A, E5B, E5AltBOC
    • QZSS: L1 C/A, L1C, L1 SAIF, L2C, L5, LEX
    • SBAS: L1 C/A (EGNOS/MSAS), L1 C/A and L5 (WAAS)
    • L-Band: OmniSTAR VBS, HP, XP and G2
  • High precision multiple correlator for GNSS pseudorange measurements
  • Unfiltered, unsmoothed pseudorange measurements data for low noise, low multipath error, low time domain correlation and high dynamic response
  • Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth
  • Proven Trimble low elevation tracking technology
  • Support for optional Distance Measurement Indicator (DMI) input
  • Support for optional GNSS Azimuth Measurement System (GAMS™)
  • Support for optional POSPac Mobile Mapping Suite post-processing software

Physical Characteristics

Board Set

  • Size:
    130 L x 100 W x 39 H mm (nominal)
  • Weight:
    0.28 kg (nominal)
  • Power:
    10 - 36 Volts DC, 20 Watts (max, with GAMS option)
  • Connectors:
    I/O: Samtec QSH-060-01-L-D-DP-A-RT1
    Power: Samtec TFM-105-12-S-D-LC
    Antenna: MMCX receptacle

Environmental Characteristics

  • Temperature:
    -40 deg C to +75 deg C (Operational)
    -55 deg C to +85 deg C (Storage)

Inertial Measurement Unit (IMU)

Type Class Temperature Power Size (L x W x H) mm Weight
IMU-21 COM -40 deg C to + 70 deg C +28 Vdc, 42 W (max) 163 L X 165 W X 163 H (mm) 4.49 kg

Key Features:

  • Proven GNSS-Aided Inertial technology from Trimble Applanix
  • Centimeter level mobile positioning accuracy
  • Industry leading continuous positioning performance in GNSS denied environments
  • Full position and orientation solution for direct georeferencing of remote sensing systems
  • Fully supported for all dynamic environments: terrestrial, airborne and marine

TRIMBLE APPLANIX

85 Leek Crescent
Richmond Hill Ontario
L4B 3B3, Canada
+1-289-695-6000 Phone
+1-905-709-6027 Fax
info@applanix.com