AP15

AP15
AP15

Product Information

Embedded GNSS-Inertial Systems for Continuous Mobile Positioning and Direct Georeferencing Applications
The Trimble AP15 GNSS-Inertial System is an embedded GNSS-Inertial OEM board set plus Inertial Measurement Unit (IMU) in a compact form factor. It is designed to give system integrators the ability to harness the best in GNSS multi-frequency positioning technology, with the superior capabilities of inertial data for continuous mobile positioning in poor signal environments, and for the orientation of imaging sensors.

The Trimble AP15 features a high-performance precision GNSS receiver and the industry leading Applanix IN-Fusion™ GNSS-Inertial integration technology running on a powerful, dedicated Inertial Engine (IE) board. This flexible, modular design ensures the ability to perform full high-powered GNSS-inertial processing without sacrificing performance, and an upgrade path to next generation GNSS boards as they become available.

Technical Specifications

  • Advanced Applanix IN-Fusion™ GNSS-Inertial integration technology
  • Solid-state MEMS IMU with Applanix SmartCal™ compensation technology
  • Advanced Trimble Maxwell 6 Custom GNSS survey technology (two chipsets)
  • 220 Channels (per chipset):
    • GPS: L1 C/A, L2C, L2E (Trimble method for tracking unencrypted L2P), L5
    • GLONASS: L1 C/A, L1 P, L2 C/A L2 P code
    • Galileo9: L1 CBOC, E5A, E5B & E5AltBOC
    • QZSS: L1 C/A, L1 SAIF, L2C, L5
    • SBAS: L1 C/A (EGNOS/MSAS), L1 C/A and L5 (WAAS)
    • L-Band: OmniSTAR VBS, HP and XP (G2)
  • High precision multiple correlator for GNSS pseudorange measurements
  • Unfiltered, unsmoothed pseudorange measurements data for low noise, low multipath error, low time domain correlation and high dynamic response
  • Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth
  • Proven Trimble low elevation tracking technology
  • Two antenna heading aiding (GNSS Azimuth Measurement System, GAMS™)
  • Support for optional Distance Measurement Indicator (DMI) input
  • Support for optional POSPac Mobile Mapping Suite post-processing software
  • No export permit required

Physical Characteristics

Board Set

  • Size:
    130 L x 100 W x 39 H mm (nominal)
    130 L x 100 W X 43 H mm (with optional connector board)
  • Weight:
    0.28 kg (nominal)
    0.38 kg (with optional connector board)
  • Power:
    10 – 28 Volts DC, 20 Watts (max, with GAMS)
  • Connectors (no connector board):
    I/O: Samtec QSH-060-01-L-D-DP-A-RT1
    Power: Samtec TFM-105-12-S-D-LC
    Antenna: MMCX receptacle (x 2)
  • Connectors (with connector board):
    Power: Samtec IPBT-103-H2-X-D-3
    IMU: Molex 87833-2620-1
    Ethernet: Molex 87833-1020-1
    IO1/2: Molex 87833-2020-1/2
    USB: Samtec USBR-A
    DMI/LED: Molex 87833-3020-1
    Antenna: MMCX receptacle (x 2)

Environmental Characteristics (Board Set)

  • Temperature:
    -40 deg C to +75 deg C (Operational)
    -55 deg C to +85 deg C (Storage)

Key Features:

  • Proven GNSS-Aided Inertial technology from Trimble Applanix
  • Centimeter level mobile positioning accuracy
  • Industry leading continuous positioning performance in GNSS denied environments
  • Full position and orientation solution for direct georeferencing of imaging systems
  • Full support for all dynamic environments: terrestrial, airborne and marine
  • High-performance GNSS two antenna heading aiding from single receiver
  • Solid-state, purpose-built ruggedized MEMS IMU featuring Applanix SmartCal™ compensation technology

TRIMBLE APPLANIX

85 Leek Crescent
Richmond Hill Ontario
L4B 3B3, Canada
+1-289-695-6000 Phone
+1-905-709-6027 Fax
info@applanix.com