Trimble v4.80 Winflash Utility(19680 KB)Firmware Warranty Date is 1 April 2013 for all receivers supported by v4.80.
R10 Firmware Image File v4.80 (*.timg)(5674 KB)The Firmware image file is available for loading new firmware via the WebUI. This is a much simpler and faster way to load new Firmware.
Trimble v4.71 and v4.64 Winflash Utility(23604 KB)Receiver and Firmware Version
  • Trimble R10 v4.71
  • Trimble R8 Model 3/Model 4 v4.71
  • Trimble R8 Model 2 v4.64
  • Trimble R7 v4.71
  • Trimble R6 Model 3/Model 4 v4.71
  • Trimble R6 Model 1/Model 2 v4.64
  • Trimble R5 v4.71
  • Trimble R4 Model 2/Model 3 v4.71
  • Trimble R4 Model 1 v4.64
    • R10 Firmware Image File v4.71 (*.timg)(5760 KB)The Firmware image file is available for loading new firmware via the WebUI. This is a much simpler and faster way to load new Firmware.
    Trimble R10, R8, R7, R6, R5, R4, 5700 II v4.70 Winflash Utility(23604 KB)
  • Trimble R10 Warranty Date v4.70, 1 August 2012
  • All other receiver models Warranty Date v4.70, 1 March 2013
    • R10 Firmware Image File v4.70 (*.timg)(5762 KB)The Firmware image file is available for loading new firmware via the WebUI. This is a much simpler and faster way to load new Firmware.
    Trimble R10, R8, R7, R6, R5, R4, 5700 II v4.63 Winflash Utility(23587 KB)
  • Trimble R10 Warranty Date v4.63, 1 August 2012
  • All other receiver models Warranty Date v4.63, 1 March 2012
    • R10 Firmware Image File v4.63 (*.timg)(5801 KB)The Firmware image file is available for loading new firmware via the WebUI. This is a much simpler and faster way to load new Firmware.
    R10 GNSS USB interface to Virtual COM port on PC(378 KB)ZIP file includes the Support Note and a file that needs to be loaded onto your PC. This allows a R10 GNSS receiver to be interfaced to your PC by USB cable and a virtual serial COM port made available to your application software.
    Windows7 USB Installer(1400 KB)