Trimble GCS900 on a Scraper with Single GPS
The Trimble® GCS900 Grade Control System with single GPS can be installed on scrapers for mass excavation applications. The Trimble GCS900 on a scraper with single GPS is a full 3D control system that puts the site plan - design surfaces, grades and alignments - inside the cab. Using the single GPS antenna configuration, the position is measured.
The on-board computer uses this position information, and compares it to the design elevation to compute cut or fill to grade. This information displays on the Control Box screen in plan, profile, cross-section view, or text.
The cut/fill data is passed to the GCS900 lightbars, providing visual guidance to the operator for up/down to grade and right/left to a defined alignment.
The Trimble GCS900 on a scraper with Single GPS is ideal for contractors who require a cost-effective, 3D grade control solution for bulk earthworks. The Single GPS option is easily upgradeable to the GCS900 for scrapers with Dual GPS as economic or jobsite requirements change. The Single GPS system is ideal for larger site projects and long-term, multi-phase projects.
Using the Trimble GCS900 with dual GPS on a scraper allows contractors to significantly improve their productivity and profitability.
- Roads and highways - rough grading
- Large earthmoving projects - dams, reclamation, etc.
- Commercial site prep - pads, grading for large slabs, etc.
- Subdivisions - pads, local infrastructure
- Land reclamation projects
Features and Benefits:
- Significant cost saving
- Less time to completion
- Less rework
- No waiting for stakes to be set
- More accurate, more consistent excavation
- Perform more complex excavation