SPS780 and SPS880 Smart GPS Antennas Support
Trimble Home  >  Construction Home  >  Site Positioning Systems  >  SPS780 and SPS880 Smart GPS Antennas  >  SPS780 and SPS880 Smart GPS Antennas Support

Downloads

SPS Receivers v2.32, v4.05 Firmware(WFC-SPS-V232V405.zip - 14896 KB)This file installs WinFlash with SPS770/780, SPSx50/x51/x61, SPS880/x81 and SPS882 devices
The following firmware is installed for each device:
  • SPS770 and SPS780 v2.32 Firmware
  • SPS880 and SPSx81 v4.05 Firmware
  • SPS882 v4.05 Firmware
  • SPSx50, SPSx51 and SPSx61 v4.05 Firmware

For v4.05 to load the receiver must have Firmware Warranty dated March 2009 or more recent.

SPS Receivers - v3.64, v2.32 Firmware(WFC-SPS-v232v364.exe - 11014 KB)This file installs WinFlash with SPS780, SPSx50/x51 and SPS880/x81 GPS receivers The following firmware is installed for each receiver:
  • SPS880 and SPSx81 v3.64 Firmware
  • SPS770 and SPS780 v2.32 Firmware
  • SPSx50 and SPSx51 v3.64 Firmware
V3.64 Firmware provides improved performance with the SiteNet 450 On Machine Radio, when the internal radio is being used. This improvement is possible due to a change in regulations covering 450MHz radios in Europe.

It is recommended for use in all GPS receivers with an internal radio being used as bases in Europe.

Also includes:

  • Improved supports Dynamic DNS operation
  • Improved performance in moving base operation with GPS SV 32
SPS Receiver v2.32, v3.71 Firmware(WFC-SPS-v232v371.exe - 10789 KB)
  • This file installs WinFlash with SPS780, SPSx50/x51 and SPS880/x81 devices
  • The following firmware is installed for each device:
    • SPS880 and SPSx81 v3.71 Firmware
    • SPS770 and SPS780 v2.32 Firmware
    • SPSx50 and SPSx51 v3.71 Firmware
For v3.71 to load the receiver must have Firmware Warranty dated 1st June 2008 or more recent.