SPS750 and SPS850 Modular GPS Receivers Support

Downloads

SPS Receivers v2.32, v4.05 Firmware (14896 KB)This file installs WinFlash with SPS770/780, SPSx50/x51/x61, SPS880/x81 and SPS882 devices
The following firmware is installed for each device:
  • SPS770 and SPS780 v2.32 Firmware
  • SPS880 and SPSx81 v4.05 Firmware
  • SPS882 v4.05 Firmware
  • SPSx50, SPSx51 and SPSx61 v4.05 Firmware

For v4.05 to load the receiver must have Firmware Warranty dated March 2009 or more recent.SPS Receivers v2.32, v4.02, v4.03 Firmware (11596 KB)

  • This file installs WinFlash with SPS780, SPSx50/x51/x61 and SPS880/x81 devices
  • The following firmware is installed for each device:
    • SPS880 and SPSx81 v4.02 Firmware
    • SPS770 and SPS780 v2.32 Firmware
    • SPSx50, SPSx51 and SPSx61 v4.03 Firmware
For v4.03 to load the receiver must have Firmware Warranty dated 10th March 2009 or more recent.
Release Notes - v4.03, SPSx51, SPSx61 firmware (51 KB)SPS Modular Receiver v4.01 Firmware - SPSx5x, SPSx61 (*.timg) (4194 KB)In order to install this firmware via the Web User Interface a v3.7x firmware must already be installed on the SPSx5x receiver. For this firmware to load your receiver must also have Firmware Warranty dated 10th March 2009 or more recent.Release Notes - v3.62, SPSx51 firmware (60 KB)Firmware for SPS receivers operating in moving base applicationsSPSx5x v3.71 Firmware (*.timg) (3771 KB)In order to install this firmware via the Web User Interface a v3.6x firmware must already be installed on the SPSx5x receiver. For this firmware to load, your receiver must have Firmware Warranty dated 1st June 2008 or more recent.SPSx5x V3.64 Firmware, Image file (3057 KB)SPSx5x firmware image file for V3.64.

The image file is used to load firmware via the web interface. For serial upgrades use the WinFlash installationSPS Receivers - v3.64, v2.32 Firmware (11014 KB)This file installs WinFlash with SPS780, SPSx50/x51 and SPS880/x81 GPS receivers The following firmware is installed for each receiver:

  • SPS880 and SPSx81 v3.64 Firmware
  • SPS770 and SPS780 v2.32 Firmware
  • SPSx50 and SPSx51 v3.64 Firmware
V3.64 Firmware provides improved performance with the SiteNet 450 On Machine Radio, when the internal radio is being used. This improvement is possible due to a change in regulations covering 450MHz radios in Europe.

It is recommended for use in all GPS receivers with an internal radio being used as bases in Europe.

Also includes:

  • Improved supports Dynamic DNS operation
  • Improved performance in moving base operation with GPS SV 32
SPS Receiver v2.32, v3.71 Firmware (10789 KB)
  • This file installs WinFlash with SPS780, SPSx50/x51 and SPS880/x81 devices
  • The following firmware is installed for each device:
    • SPS880 and SPSx81 v3.71 Firmware
    • SPS770 and SPS780 v2.32 Firmware
    • SPSx50 and SPSx51 v3.71 Firmware
For v3.71 to load the receiver must have Firmware Warranty dated 1st June 2008 or more recent.
Configuration ToolBox utility, v6.7.0.0 (7821 KB)SPSx50 Remote Front (895 KB)
  • SPSx50 Remote Front is an unsupported utility designed to allow users to control the SPSx50 front panel remotely across an Ethernet network.
  • Note: We've taken great care to ensure that SPSx50 Remote Front operates as it should, but it is unsupported by Trimble. For this reason, Trimble Support is unable to answer questions about SPSx50 Remote Front.