SPS550 & SPS550H GPS Receiver Support
Trimble Home  >  Construction Home  > Site Positioning Systems  >  SPS550 & SPS550H GPS Receiver Support

Downloads

Latest SPS GNSS Firmware and UtilitiesThis folder contains the latest SPS GNSS firmware and utility software
SPS Modular Receiver v4.01 Firmware - SPSx5x, SPSx61 (*.timg)(4194 KB)In order to install this firmware via the Web User Interface a v3.7x firmware must already be installed on the SPSx5x receiver. For this firmware to load your receiver must also have Firmware Warranty dated 10th March 2009 or more recent.
Release Notes - v3.62, SPSx51 firmware(60 KB)Firmware for SPS receivers operating in moving base applications
SPS Receivers - v3.64, v2.32 Firmware(11014 KB)This file installs WinFlash with SPS780, SPSx50/x51 and SPS880/x81 GPS receivers The following firmware is installed for each receiver:
  • SPS880 and SPSx81 v3.64 Firmware
  • SPS770 and SPS780 v2.32 Firmware
  • SPSx50 and SPSx51 v3.64 Firmware
V3.64 Firmware provides improved performance with the SiteNet 450 On Machine Radio, when the internal radio is being used. This improvement is possible due to a change in regulations covering 450MHz radios in Europe.

It is recommended for use in all GPS receivers with an internal radio being used as bases in Europe.

Also includes:

  • Improved supports Dynamic DNS operation
  • Improved performance in moving base operation with GPS SV 32
SPSx5x V3.64 Firmware, Image file(3057 KB)SPSx5x firmware image file for V3.64.

The image file is used to load firmware via the web interface. For serial upgrades use the WinFlash installation

Older VersionsThis folder contains older versions of firmware.