CenterPoint RTX

---

Delivery

Accuracy: 1.5" (3.8 cm)**

Initialization/Convergence: 1 minute (in light blue) Standard* (in dark blue) Depending on location

---

Coverage Area

---

The new Trimble® CenterPoint™ RTX™ correction service delivers GPS or GNSS enabled, repeatable 1.5" (3.8 cm) corrections via satellite directly to your receiver. CenterPoint RTX works with the built-in receiver in your existing FmX® integrated display, CFX-750™ display, or AG-372 GNSS receiver. Eliminating the need to purchase additional radio hardware or cellular data plans.

AVAILABLE THROUGHOUT MOST OF THE WORLD:

» High-accuracy - Provides 1.5" (3.8 cm) horizontal accuracy.

» GNSS compatibility - The service uses both GPS and GLONASS satellites on your existing FmX® integrated display, CFX-750™ display, or AG-372 GNSS receiver, to increase your satellite availability and extend your operating hours.

» Free GLONASS - With CenterPoint RTX subscriptions, GLONASS satellite access is unlocked for free throughout the duration of the subscription.

» More uptime - Continue working during times of correction signal loss for up to two minutes.

» Fast initialization - CenterPoint RTX converges to full accuracy in 30 minutes or less. Positions may be used much sooner at a lower accuracy level—the user decides.

» Low start-up cost - Works with the receiver already built into FmX® integrated display, CFX-750™ display, or AG-372 GNSS receiver. No need for additional radio hardware or cellular data plans.

» FastRestart - Decrease the standard* initialization time to less than five minutes at the beginning of each day by starting your tractor in the same place you shut it off the night before.

» No base station needed - No need to fear losing radio signal reception, since you don't need a base station.

» Accuracy over large geographic area - Available throughout most of the world.

*Receiver convergence time varies based on GNSS constellation health, level of multipath, and proximity to obstructions such as large trees and buildings. In ideal conditions, receivers can converge to a 30cm position in approximately 10 minutes, 20cm in 15 minutes, and full accuracy in less than 30 minutes.

**All horizontal accuracy specifications are based on repeatable in-field performance 95% of the time.