CenterPoint RTX

---

Delivery

Accuracy: 1.5" (4 cm)

Initialization/Convergence: 1 minute (in light blue) Standard* (in dark blue) Depending on location

---

Coverage Area

---

The new Trimble® CenterPoint™ RTX™ correction service delivers GPS or GNSS enabled, repeatable 1.5-inch (4 cm) corrections via satellite directly to your receiver. CenterPoint RTX works with the built-in receiver in your existing Trimble FmX® integrated display or Trimble CFX-750™ display, eliminating the need to purchase additional radio hardware or cellular data plans.

CenterPoint RTX correction service is the most accurate satellite-delivered correction service available. It doesn't require an RTK base station or cellular service and is available throughout a large portion of North America. Depending on where you are located, CenterPoint RTX can initialize in as quickly as a minute.

AVAILABLE IN MUCH OF NORTH AMERICA:

» High-accuracy - Provides 1.5-inch horizontal accuracy.

» GNSS compatibility � The fast initialization service uses GPS satellite access while the standard convergence service uses both GPS and GLONASS satellites on your existing FmX or CFX-750 display to increase your satellite availability and extend your operating hours.

» Free GLONASS - With CenterPoint RTX subscriptions, GLONASS satellite access is unlocked for free throughout the duration of the subscription.

» More uptime - Continue working during times of correction signal loss for up to two minutes.

» Fast initialization - As quick as a minute in certain parts of our coverage area.

» Low start-up cost - Works with the receiver already built into Trimble FmX and CFX-750 displays. No need for additional radio hardware or cellular data plans.

» FastRestart - Decrease the standard* initialization time to less than 3 minutes at the beginning of each day by starting your tractor in the same place you shut it off the night before.

» No base station needed - No need to fear losing radio signal reception, since you don't need a base station.

» Accuracy over large geographic area - Available throughout the middle of North America, allowing operators to work within a large coverage area.

*Receiver convergence time varies based on GNSS constellation health, level of multipath, and proximity to obstructions such as large trees and buildings. In ideal conditions, receivers can converge to a 30cm position in approximately 10 minutes, 20cm in 15 minutes, 10cm in 30 minutes and full accuracy in less than 45 minutes.